EXAIR’s CE Compliant Line of Air Knives

Visit https://exair.co/184-sakpr for further information

EXAIR's family of Air Knives (Super Air Knife, Standard Air Knife, and Full-Flow Air Knife) provides a laminar curtain of air that can be used for blowoff, cleaning, drying and cooling applications. Independent laboratory tests certify that EXAIR's Air Knife Systems have met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark. Plus EXAIR manufactures them in a large variety of custom materials and designs.

12/11/24, 12:34 PM | Supply Chain, Engineering | EXAIR

EXAIR's family of Air Knives (Super Air Knife, Standard Air Knife, and Full-Flow Air Knife) provides a laminar curtain of air that can be used for blowoff, cleaning, drying and cooling applications. Independent laboratory tests certify that EXAIR's Air Knife Systems have met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark. Plus EXAIR manufactures them in a large variety of custom materials and designs.

By entraining high volumes of room air, EXAIR's Air Knife Systems use less compressed air and less energy than other blowoff products. With their small profiles they can be mounted to accommodate many industrial applications involving conveyors and webs, even in tight spaces. EXAIR manufactures Air Knife Systems in aluminum, 303 stainless steel, 316 stainless steel and PVDF for corrosive environments. Available stock sizes range from 3″ (76mm) to 108″ (2743mm). These Air Knives meets OSHA maximum dead-end pressure and noise requirements. https://exair.co/184-sakpr
EXAIR is offering a special right now on all of their Super Air Knives. Learn more at https://exair.co/184-sakpromo

12/11/24, 12:34 PM | Supply Chain, Engineering | EXAIR
Subscribe to Newsletter
More Supply Chain News | Stories | Articles

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
More Products
Feature Your Product