Proposed FAA Commercial UAS Rules

From IEEE Spectrum:

  • Unmanned aircraft must weigh less than 55 lbs. (25 kg).
  • Visual line-of-sight (VLOS) only; the unmanned aircraft must remain within VLOS of the operator or visual observer.
  • At all times the small unmanned aircraft must remain close enough to the operator for the operator to be capable of seeing the aircraft with vision unaided by any device other than corrective lenses.
  • Small unmanned aircraft may not operate over any persons not directly involved in the operation.
  • Daylight-only operations (official sunrise to official sunset, local time).
  • Must yield right-of-way to other aircraft, manned or unmanned.
  • May use visual observer (VO) but not required.
  • First-person view camera cannot satisfy “see-and-avoid” requirement but can be used as long as requirement is satisfied in other ways.
  • Maximum airspeed of 100 mph (87 knots).
  • Maximum altitude of 500 feet above ground level... (full article)

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

JCO Series: NVIDIA Jetson Rugged AI Edge Computers

JCO Series: NVIDIA Jetson Rugged AI Edge Computers

The JCO Series is a line of NVIDIA Jetson rugged AI edge computers. Unlike standard CPUs, the JCO series employs NVIDIA Jetson-Orin modules, introducing an ARM-based SOM (System-on-Module) architecture with CPU, GPU, and RAM on the same module. This integration brings about significant AI performance right to the edge, coupled with a rugged, fanless design suitable for enduring extreme environments. This series highlights low power consumption (7-60 watts) yet delivers high AI performance up to 275 TOPS, a feat difficult for typical x86 solutions to match. The integration of customizable EDGEBoost IO technology and out-of-band remote management features ensures advanced connectivity and maintenance capabilities, solidifying the JCO Series as an essential solution for mission-critical deployments such as AGV & AMRs, security & surveillance, industrial automation, and industrial IoT. With UL listed, E-Mark, FCC, and CE certifications, the JCO Series meets the highest industry standards for ultimate safety and reliability.