Hospital to get first dedicated 3D tissue-printing facility

11/28/16, 05:58 AM | Additive & 3D Printing, Supply Chain | 3D Printing, Medical and Service

Steve Dent for enGadget: You still can't get a 3D-printed liver transplant made from your own cells, but an Australian hospital is trying to push the tech into the mainstream. The Queensland University of Technology (QUT) in Brisbane is building a dedicated "biofabrication" space where doctors and researchers can develop tech to model and print cartilage, bone and other human tissue. "It will be the first time a biomanufacturing institute will be co-located with a high-level hospital," said Australian Minister of Health Cameron Dick.

The facility will occupy two floors of the hospital and use state of the art tissue manufacturing tech in surgery procedures. "Our vision for healthcare is that the biofabrication institute will pave the way for 3D printers to sit in operating theaters, ready to print tissue as needed, in our hospitals of the future," Dick said. Cont'd...

More Additive & 3D Printing Stories | Articles | News

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.