Combining augmented reality, 3D printing and a robotic arm to prototype in real time

Source: TechCrunch
02/21/18, 05:45 AM | Additive & 3D Printing, Engineering | Rapid Prototyping

Brian Heater for TechCrunch:  Robotic Modeling Assistant (RoMA) is a joint project out of MIT and Cornell that brings together a variety of different emerging technologies in an attempt to build a better prototyping machine.

Using an augmented reality headset and two controllers, the designer builds a 3D model using a CAD (computer-aided design) program. A robotic arm then goes to work constructing a skeletal model using a simple plastic depositing 3D printer mounted on its hand.

“With RoMA, users can integrate real-world constraints into a design rapidly, allowing them to create well-proportioned tangible artifacts,” according to team leader, Huaishu Peng. “Users can even directly design on and around an existing object, and extending the artifact by in-situ fabrication.”  Full Article:

More Additive & 3D Printing Stories | Articles | News

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
More Products
Feature Your Product