How 3D Printing Streamlines the Engineering Workflow
Michael Molitch-Hou for Engineering.com: The desktop 3D printing space has become an interesting one in the last year or so, as manufacturers shift the focus away from consumers and towards professional and industrial users. The technology has proven that it may not quite be ready to produce consumer goods for every household—or perhaps households aren't quite ready for 3D printing at home. Those in the industry know, however, that low-cost 3D printing is still a powerful technology, if not for fabricating home goods, then as an early design tool and, in some cases, even for short-run manufacturing. Cont'd...
3D Printer Market Is Seen as Pillar to Revive Japan's Manufacturing Industry
The SMEs (small and medium-sized enterprises), especially the parts manufacturing factories will swell with the success of the 3D printer.
Brushless DC Motors vs. Servo Motors vs. Inverters
We have put together a summary (Table 1) that compares these three technologies in a simple to understand format.
Metal additive manufacturing software 'Amphyon' uses simulations to offset printing distortions
Benedict for 3Ders.org: German startup Additive Works is developing a simulation-based preprocessing software for metal additive manufacturing. The “Amphyon” software package, currently in beta, uses a four-step approach which enables manufacturers to predict and avoid potential deformations in their printed parts.
As the metal additive manufacturing industry expands its collective wealth of knowledge and experience, users of SLM 3D printers are becoming less likely to create faulty printed parts. While a complete amateur might make the mistake of printing an unsupported or weak structure which exhibits radical contortions before it has even left the print bed, most makers now know a few things about stress points, deformations, and how to avoid bad prints. Despite these advancements, problems still persist even for the most advanced users of laser-based 3D printers. Problems such as residual stresses, deformations, and insufficient part density can occur frequently and, due to various design, material, and hardware factors, can often be hard to predict. Cont'd...
Autodesk Introduces 2017 CAM Products for Industrial Manufacturing
Updated Delcam FeatureCAM, PowerMill and PartMaker Software Now Part of Autodesk Manufacturing Portfolio.
Aerospace Manufacturing: A Need to Innovate, But No One to Do the Work
In the face of increased global competitiveness, the pressure to innovate is on. Given this pressure and the industry's disappearing labor force, A&D executives are turning to automation to ensure the consistent productivity of their facilities.
Do the benefits of robotics outweigh the heavy demands on infrastructure?
Ben Rossi for Information Age: Robotics has already been deployed in manufacturing to great effect for over a decade, performing delicate and precise tasks with greater accuracy than humans.
But now cutting-edge robots and other smart machines are set to join forces with the rapidly expanding Internet of Things, which Gartner estimates will total 25 billion devices by 2020.
In healthcare, robotic services are already operating pharmacy dispensers and robotic trolleys are now deployed in a growing number of hospitals. In hospitality, robots deliver services such as drinks dispensing and automated trolley deliveries.
Robots have even made their way into education, where they are being deployed successfully as a tutor, tool or peer in learning activities.
But what impact will this large-scale adoption of robotics have on existing networks as they encounter inevitable further strain? Cont'd...
This Time, 3D Printer Makers Think They Found a Sweet Spot
Olga Kharif for Bloomberg Technology: 3D printing has long been a cool technology in search of a huge market. The industry may have found one in mass production.
Because of its high cost and slow pace, 3D printing’s use in manufacturing has been limited mostly to prototyping, making plastic molds for teeth alignment and creating tools. That may be about to change, potentially lifting the shares of printer makers 3D Systems Inc. and Stratasys Ltd. after a long slump.
HP Inc. will introduce a $130,000 printer later this year, which it says can make parts at half the expense and at least 10 times faster than rival printers -- and likely use lower-cost materials. While HP’s entry could be a competitive blow, it may also help expand the market for 3D mass production, where other printer companies have already turned their focus.
Jabil Circuit Inc. plans to be an early adopter of HP’s device, printing end plastic parts for aerospace, auto and industrial applications that it currently makes using processes such as injection molding, John Dulchinos, vice president of digital manufacturing at the electronics-manufacturing service provider, said in an interview. Cont'd...
Design Automation Reduces Manufacturing Lead Time for Fenestration Products Manufacturers
Design automation is highly beneficial to such industries that develop products which although look the same, have the provision of customization for specific customer requirements.
Upcoming Tradeshow, Conference & Exhibition Summary - September - December 2016
Here is a summary of what Tradeshows, Conferences & Exhibitions to look forward to in the coming months.
3D Hubs, an online marketplace for local 3D printing, scores $7M Series B
Steve O'Hear for TechCrunch: 3D Hubs, an online marketplace for 3D printing services, is tapping into two recent trends enabled by industrial 3D printing: the rapid prototyping of new products, and the move to personalised and bespoke production.
The Amsterdam-headquartered startup connects those requiring 3D printing with local 3D printers, both through its website that lets you order 3D printing jobs online, including getting a real-time quote, and via an API that enables companies to automate short production runs of products on-demand.
The latter, of course, is also powering “zero-inventory” manufacturing: products are only produced on a per-order basis (and in some instances are also fulfilled directly to the end customer), which is another trend that is starting to gain traction. Cont'd...
Robots in Manufacturing Applications
Standard robot models are now mass-produced, making them more available to meet the ever-increasing demand. These robots are more straightforward, and more conducive to plug and play installation.
Industry 4.0 Needs a New Generation of 3D Tools
"Digital Factory" solutions - blazing the trail for new manufacturing technologies and production concepts.
IISc building India's 1st smart factory in Bengaluru
Chethan Kumar for The Times of India: India's first smart factory — moving from automation to autonomy — where machines speak with each other, is being set up in Bengaluru.
A smart factory, armed with data exchange in manufacturing and the Internet of Things (IoT) is the future and experts are calling it revolution Industry 4.0. Reports peg the smart factory industry to touch $215 billion by by 2025 and there has been no major economy in the world that is not embracing it.
And, India's very own smart factory, the first one, is making progress at the Indian Institute of Science's (IISc) Centre for Product Design and Manufacturing (CPDM) with a seed funding from The Boeing Company.
CPDM Chairman Amaresh Chakrabarti, who spoke exclusively to TOI about the project, said: "Yes, it will actually be manufacturing things here. But it will be a scaled down version, we won't have the numbers of an actual factory." As for the funding, he said: "I can only say Boeing is giving us enough to implement the project. I cannot discuss details. But the project is revolutionary. Indian factories now have automation, we've made some progress there, but here, we are talking about a facility that is autonomous, thinking and working on its own." Cont'd...
Robotics, automation, and how a strong network is needed to connect it all up
Manish Sablokk for IoTTech: Cutting-edge robots and other advanced smart machines are set to be added into the rapidly expanding Internet of Things, which is projected to reach 25 billion devices by 2020. Robotics has already been used in manufacturing to great effect for over a decade, performing delicate and precise tasks with a higher success rate than humans. With advancements such as 'deep learning' robots, delivery drones and ubiquitous knowledge-sharing between machines, widespread robotics adoption is becoming far more feasible.
In healthcare, there are already robotic services in operation with automated pharmacy dispensing and robotic trolleys - robots that can navigate between floors and even call the lift using a Wi-Fi sensor. The hospitality sector has also been a keen adopter of robotics to deliver services and in education, robots are being deployed successfully as a tutor, tool or peer in learning activities, providing language, science and technology education. Cont'd...
Records 2476 to 2490 of 2810
First | Previous | Next | Last
Featured Product
Model TR1 Tru-Trac
The Model TR1 Tru-Trac® linear measurement solution is a versatile option for tracking velocity, position, or distance over a wide variety of surfaces. An integrated encoder, measuring wheel, and spring-loaded torsion arm in one, compact unit, the Model TR1 is easy to install. The spring-loaded torsion arm offers adjustable torsion load, allowing the Model TR1 to be mounted in almost any orientation - even upside-down. The threaded shaft on the pivot axis is field reversible, providing mounting access from either side. With operating speeds up to 3000 feet per minute, a wide variety of configuration options - including multiple wheel material options - and a housing made from a durable, conductive composite material that minimizes static buildup, the Model TR1 Tru-Trac® is the ideal solution for countless applications.
